Ascot 5

Ascot 5

The Ascot 5kw stove brings the best of modern technology and traditional looks to the Henley range. This stove is external air ready if your house requires this but can be used as a standard stove also. This external air technology gives unrivalled air control allowing you to save more fuel than a standard stove.

Available in: Matt Black, Enamel Black, Enamel Cream.

Stove Specs

Power: 5kW(17060BTU)
Finish: Cast Iron
Flue Size: 125mm
Flue Location: Top/Rear

Features

ce

CE – EN13240

A Henley stove with this icon means that the stove meets European standard of test for stoves fired by solid fuel, Incorporating corrigenda September 2003, June 2006 and August 2007.

warranty

5 Year Warranty

All Henley stoves come with a 5 year warranty on the body of the stove and 1 year warranty on baffle plate, grate and fuel retainer.

air-wash

Air Wash

All Henley stoves come with an airwash system which helps to keep the glass clean. It uses a specially placed vent or vents to draw in air from the outside to which will wash over the front of the glass.

clearburn

Clearburn

A Henley stove with this icon features a tertiary air system.  This creates a cleanburn system where hot air is pushed into the firebox above the normal height of the fire. This allows the excess gasses to combust given a cleaner burn.

colour-optionsFinish Option

A Henley stove with this icons means the stove comes in a variety of painted/enamel finishes.

defra

Defra Exempt

A Henley stove with this icon are DEFRA exempt and have been fully tested to this standard. A DEFRA exempt stove can be used in a Smoke Control Area whereas a non DEFRA stove cannot.

smoke-control

Smoke Control Areas Approved

A Henley stove with this icon is approved for Smoke Control Areas. If you are in a Smoke Control Area then you can only burn authorised fuels (generally just smokeless fuels, although the list is available from DEFRA).

external-air

External Air

A Henley stove with this icon has an external air facility allowing the air to come directly from outside your building rather than through a vent in the room. This is required for heat recovery systems in new build projects.

passive-air

Passive Air

A Henley stove with this icon means that the stove is fully compliant with regulations for fully passive houses.

Contact us